Skip to end of metadata
  • Created by Former user, last modified by Former user on Jun 25, 2013
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Prerequisites

Follow the instructions at the IVS Installation Guide to get IVS installed and running. 

Installation

Install the packages required for kvm

sudo apt-get install kvm libvirt-bin virtinst

Remove the bridge created by libvirt
(Do this step only if you are exclusively using xenon for your virtual network topology on this host.)

sudo virsh net-destroy default; sudo virsh net-autostart \--disable default

Create the following script which adds the TAP interface to the xenon switch when machines are started

/etc/ivs-ifup

#!/bin/sh
/sbin/ifconfig $1 0.0.0.0 up
/usr/sbin/xenon-ctl add-port indigo $1
  • No labels