...
| Code Block |
|---|
sudo apt-get install libnl3-dev pkg-config python-tz libpcap-dev openvswitch-datapath-dkms
|
Ubuntu 12.04
| Code Block |
|---|
sudo apt-get install libnl-3-dev libnl-genl-3-dev libnl-route-3-dev pkg-config python-tz libpcap-dev openvswitch-datapath-dkms
|
Get the Code
Download most recent release 0.3
...
You'll need an OpenFlow controller to use IVS. We suggest Floodlight, which should work out of the box. Follow your controller's instructions to get it running and note down its IP address.
Kernel Module
The openvswitch kernel module must be loaded:
| Code Block |
|---|
modprobe openvswitch
|
Run the IVS daemon
You'll need to tell it the IP address of the controller (-c) and the initial set of network interfaces to connect (-i). Here's an example command line:
...