Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Migrated to Confluence 5.3

Using IVS with libvirt (KVM)

Prerequisites

Follow the instructions at the IVS Installation Guide to get IVS installed and running. 

...

Configure any virtual machines with the following interface statement under <devices> to attach them to the xenon IVS switch.

Code Block
sudo virsh edit <vmname>
Code Block
<interface type='ethernet'>
  <script path='/etc/xenonivs-ifup'/>
</interface>

Here is a full sample of an XML configuration for a VM running on a xenon IVS switch.

Code Block
<domain type='kvm'>
  <name>newvm2</name>
  <uuid>cd4e4b03-487d-6583-0b95-d4a41cc2503b</uuid>
  <memory>262144</memory>
  <currentMemory>262144</currentMemory>
  <vcpu>1</vcpu>
  <os>
    <type arch='x86_64' machine='pc-1.0'>hvm</type>
    <boot dev='hd'/>
  </os>
  <features>
    <acpi/>
  </features>
  <clock offset='utc'/>
  <on_poweroff>destroy</on_poweroff>
  <on_reboot>restart</on_reboot>
  <on_crash>destroy</on_crash>
  <devices>
    <emulator>/usr/bin/kvm</emulator>
    <disk type='file' device='disk'>
      <driver name='qemu' type='qcow2'/>
      <source file='/home/administrator/newvm2/tmpRVK6eg.qcow2'/>
      <target dev='hda' bus='ide'/>
      <address type='drive' controller='0' bus='0' unit='0'/>
    </disk>
    <controller type='ide' index='0'>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/>
    </controller>
    <interface type='ethernet'>
      <mac address='52:54:00:d6:48:b1'/>
      <script path='/etc/xenonivs-ifup'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
    </interface>
    <input type='mouse' bus='ps2'/>
    <graphics type='vnc' port='-1' autoport='yes' listen='127.0.0.1'>
      <listen type='address' address='127.0.0.1'/>
    </graphics>
    <video>
      <model type='cirrus' vram='9216' heads='1'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
    </video>
    <memballoon model='virtio'>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
    </memballoon>
  </devices>
</domain>

After starting your virtual machines, you should be able to see the tap interfaces connected to the switch with xenonivs-ctl show.

Code Block
~$ xenonivs-ctl show
indigo:
  kernel lookups: hit=0 missed=390 lost=12
  kernel flows=0
  ports:
    0 indigo (internal)
      rx: packets=12 bytes=720 errors=0 dropped=0
      tx: packets=0 bytes=0 errors=0 dropped=0
    1 tap0
      rx: packets=35 bytes=4213 errors=0 dropped=0
      tx: packets=35 bytes=4402 errors=0 dropped=0
    2 tap1
      rx: packets=35 bytes=4402 errors=0 dropped=0
      tx: packets=35 bytes=4213 errors=0 dropped=0
    1023 gre (gre)
      rx: packets=0 bytes=0 errors=0 dropped=0
      tx: packets=0 bytes=0 errors=0 dropped=362